Spacelabs 90369 Ultraview

Ultraview 1050 Monitor 90369

• Lightweight, compact, highly portable
• Shares same touchscreen controls as other Ultraview Care Network™ and PCMS™ monitors of appropriate levels
• Compatible with the full line of Ultraview Care Network and PCMS modules
• Large, 10.4-inch (26.42 cm), TFT color display with 140° viewing angle
• Data Shuttle® option allows up to 24 hours of patient data to be transferred to other Ultraview Care Network and PCMS monitors
• Advanced power management system maximizes battery performance during transport; includes battery “fuel-gauge”
• Optional interactive bed-to-bed Ethernet communication
• Instant “Quicknet” 10BaseT Ethernet connection
• Optional wireless Ethernet with one to five outbound waveforms and numeric vital signs transmitted at 2.4 GHz
• Optional built-in 2-channel recorder
• Optional mainstream EtCO2, O2, and Min CO2
• Support for up to 250 nodes on a network with the Expanded Network feature.

Specifications

• Touchscreen — With the exception of power (ON/OFF), all controls are on-screen touchkeys; touch is sensed by infrared optical devices; optional controls include mouse and keyboard
• Waveform Capacity — four, five, or six waveforms
• Module Capacity — 90369 accepts one Ultraview or PCMS module internally and will support up to two additional modules using the 90499 module housing
• Parameter Capacity — 18 parameters utilizing Ultraview and PCMS modules as well as Flexport® interfaces
• Trends — 24 hours of trend data can be displayed
• Graphic — 1-, 2-, 6-,12- or 24-hour segments; data is stored in 1-minute resolutions (6-hour segment is the default)
• Tabular — Time increments of 1, 5, 10, 15, or 30 minutes; 1, 1.5 or 3 hours (1 hour is the default)
• Remote View/Alarm Watch — When equipped with the Ethernet option, the 1050 provides a waveform display from a remote bedside or telemetry patient on the Ultraview network either on request (Remote View) and/or in response to an alarm (Alarm Watch); the 1050 provides a waveform display from up to 32 selected beds; an Ultraview bedside monitor can be remotely viewed by up to 16 network devices simultaneously (e.g., monitors, workstations)

Electrical Specifications

• Mains Power — Line voltage: 100-240 VAC; Frequency: 50-60 Hz
• Batteries — Both sealed-lead acid (SLA) and Spacelabs Medical nickel metal hydride (NiMH) are supported. One or two 12 V (2.30 Ah SLA or 2.45 Ah NiMH) batteries may be used, providing up to 2.0 hours of operation (TFT display) for up to 300 charge/discharge cycles with SLA and up to 2.5 hours of operation (TFT display) for up to 600 charge/discharge cycles with NiMH; operating time is dependent on configuration and usage; 1.5 hours are required to charge batteries to 100% of capacity with AC connected to rear panel and mains switch in the OFF position, 3-hour charge time required with the mains switch in the ON position
• Power Fail Backup — Will maintain patient data for a minimum of three minutes
• Isolation — Chassis leakage current not greater than 300 ìA (meets AAMI, UL2601-1, CSA #601.1 and IEC 601-1 standards)

Physical Dimensions

• Height:  8.3 in (21.1 cm)
• Depth:  6.2 in (15.8 cm)
• Width:  11.7 in (29.7 cm)
• Weight:  10.0 Ibs (4.6 kg)