Refurbished - Air-Shields TI-100 Transport Incubator

The Air-Shields TI-100 Transport Incubator is available refurbished from DRE.

Features

• Intended for transport of high risk, premature, low birth-weight, or critically ill newborns.
• It provides a means to control air temperature, oxygen concentrations, and relative humidity.
• A double wall hood permits full visibility and provides an effective thermal barrier from the environment.

Specifications

Dimensions (with stand):

Length: 40.25 in. (102 cm)

Width: 22.25 in. (56.5 cm)

Height: 46.75 in. (118.7 cm) maximum, 34.75 in. (88.3 cm) minimum

 

Power Requirements:

AC: 110.120 VAC 50/60/400 Hz, sine or square wave 170/200 Watts and 225/270 Watts with batteries charging.

DC: 12 VDC, 115 Watts

 

Internal Battery:

Type: gel type, sealed and rechargeable.

Voltage: 12 VDC nominal

Quantity: 2

Charging Time: two batteries take 20 minutes to recharge from fully discharged.

Life expectancy: minimum 200 full charge/discharge cycles.

 

Chassis Leakage Current: 100µA or less

 

Alarms:

High Temp: Actuates at displayed incubator temperature of 39º ± 0.5 ºC.

Sensor: Actuates if High Temp alarm sensor is electrically open or shorted.

Power Failure: Actuates if main AC power fails and no DC back-up power is present.

Heater Temp: Actuates if heater temperature exceeds 77 ºC nominal.

Low DC: Actuates if incubator DC voltage has fallen below 10.5 VDC nominal.

 

Temperature:

Set Point Range: 21.5 ºC ± 1.0 ºC to 38 ºC

Rise Time: 30 minutes

Variability: 0.2 ºC

Overshoot: 1.5 ºC maximum

Uniformity: 1 ºC

Correlation of Displayed Incubator to Actual Incubator Temperature at Temperature
     Equilibrium: 1 ºC

Correlation of Displayed Incubator Temperature to Set Point at Temperature
     Equilibrium: ± 0.5 ºC

 Observation Light Output: 10-foot candles at mattress level