Refurbished - Air-Shields C-2000 Infant Incubator

Caring for low birth weight neonates requires creating the best possible thermal-neutral environment. The C2000 Infant Incubator helps to promote and foster neonatal care by delivering a heated and humidified environment.

Features: 

• Optional Dual Access Doors – Allow access from either side, expediting care. 
• Thermal Performance – Patented dual air curtains reduce radiant heat loss from the infant by warming the inner hood surface. A bi-directional airflow feature helps to minimize temperature fluctuations when the access doors are opened.
• Large Mattress and Dual Probes – The C2000 incubator allows for simultaneous care of twins in the same unit, allowing more incubators for more patients.
  
• Internal Noise Level less than or equal to 47dBA – Maintains a supportive environment for both patient and caregiver.
  
• Optional In-bed Scale – Weigh the baby in a warm environment with minimal disturbance.
• 24-hour Data Trends – This unit facilitates record keeping for air and skin temperature, oxygen, humidity, heater power, and weight changes.

Technical Specifications:

Air-Shields Incubator with VHA Stand - 

• Width:  38.0" (99 cm)
• Depth:  26.3" (67 cm)
• Height:  52.5" - 60" (133.4 to 152.4 cm)
• Weight:  198 lbs (90 kg)

Air-Shields Incubator with Fixed Height Stand - 

• Width:  46.8" (119 cm)
• Depth:  26.3" (67 cm)
• Height:  56" (142 cm)
• Weight:  175 lbs (79.5 kg)

Hood Specifications:

• Mattress tray size:  16" x 32" (40.6  81 cm)
• Mattress to hood:  16.25" (41.2 cm)
• Access panel opening:  11" (28 cm)
• Standard hood includes:  4 port doors; 2 iris ports; front access panel; 3 left and 3 right tubing grommets-front
• Mattress tilt:  ±12° (±1° C)
• Micro air intake filter:  99.9% efficiency
• Particle size removal:  0.3 micron
• Air mode control range:  20 to 39.0°C
• Air mode override: >37.0°C
• Air flow velocity across mattress:  <10 cm/sec
• Skin mode control range:  34.0 to 38.0° C
• Skin mode override:  >37.0° C
• Temperature rise time (at 22°C ambient):  <35 minutes
• CO₂ levels:  <0.5% when delivered at 750 ml/min at a point 10 cm above the mattress
• Operating noise level in hood:  47 dBA (49 dBA with Servo Controlled Oxygen)
• Casters (4 casters, 1 steering):  5" (12.7 cm)
• RS-232 output
• Controller with LCD with brightness control
• Selectable color combinations: white on blue background (default) or yellow on black background
• Dual-skin temperature monitoring
• 6 AC (Mains) outlet
• Keypad lock
• 24 Hour trend of: Air temperature, skin temperature (1 and 2), Relative humidity, Oxygen concentration, Heater power

Environmental Requirements -

• Operating temperature range:  20°C to 30°C ambient
• Storage temperature range:  -25°C to 60°C ambient
• Operating humidity range: 5% RH to 99% RH, non condensing
• Storage humidity range: 0% to 99% RH, non condensing
• Operating RH sensor temp. range: 20°C to 41°C
• Operating O₂ sensor temp. range:  20°C to 41°C
• O₂ sensor calibration pressure:  600 to 900 mm Hg

Alarms -

• Temperature (limiting ≤): 38°C for air temp. < 37°C; 40.0° C for air temp. > 37° C
• Baby set temperature:  ±1° C (or ±0.5° C)
• Air set temperature:  +1.5° C/-2.5° C

High/Low Skin Temperature Alarms: 

• High/low air temperature;
• High temperature cut-out;
• Air probe failure;
• Skin probe failure/disconnect;
• Low air flow;
• Low humidity (humidity option);
• Low/high oxygen (±3%) (oxygen option);
• Oxygen calibration required (oxygen option);
• Oxygen cell difference (oxygen option);
• Oxygen solenoid failure (oxygen option);
• Scale disconnect (scale option);
• Too much weight (scale option)

System Alarms:

• Controller failure
• Sensor module failure
• sensor module out of position
• Motor failure
• Power failure
• Heater failure
• Sensor disconnected
• Key stuck

Servo Humidity Option: 

• Water capacity:  1000ml
• Refill time:  >24 hrs @ 85 RH%;
• Range:  30 to 95%
• Display accuracy: ±6% RH%

Servo Oxygen Option:  

• Accuracy:  100% cal ±3%
• Accuracy:   21% cal ±5%
• Range:  21 to 65%
• Resolution: 1%

Scale Option:

• Weight range:  0 to 15.4 lbs (0 to 7 kg)
• Weight display resolution:  1 g or 1 oz (OIML = 10 g or 1 oz)
• Weight accuracy:  2 g ±  1/2 digit up to 2 kg (OIML = 10 g); 5 g ± 1/2 digit over 2 kg
• Weight gain or loss trended over 7 days

Other Options (Attach to Accessory Rail):

• IV Pole weight limit:  10.4 lb (4.72 kg)
• Monitor shelf weight limit: 25 lb (11.4 kg)
• Rear access door:  Provided with 2 port doors and 4 additional hood grommets 2 left and 2 right
• Ventilator tube support
• Oxygen tank mount

Drawer Options:

• Large deep swivel type
• Two shallow swivel out type