Medical Equipment

Mallinkrodt Warm Touch 5300A Patient Warmer

Model Number:
75300ACondition:

Warm Touch Features:

Highest air flow rate of any convective air warming system (55 CFM) to effectively maintain blanket temperature.
Fast warm-up: 38°C in only 30 seconds.
Boost setting warms the patient at 45°C for 45 minutes before reverting to the high setting of 43°C.
Safety alarm and shutoff if temperature exceeds 45°C.
Mallinkrodt Includes HEPA filter to reduce airborne particulates (99.97% efficient at 0.3 microns).
Digital hour meter on front for easy reference.
Durable hose is thicker for enhanced insulation; hose is collapsible to store securely out of the way.
Cord wrap keeps cord out of the way.
The Mallinkrodt Warm Touch has multiple mounting options (cart, bedrail, IV pole) or unit may be placed directly on the floor.

SPECIFICATIONS

Controls and Indicators:

Main Power Switch: Controls AC power to unit
Air Temperature Controls: Ambient, Low, Medium and High, indicator illuminates to show selected setting
Attention Indicator: Illuminates when thermostat has interrupted heater for patient safety

Performance:

Approximate Blanket: Boost: 45ºC for 45 minutes
Temperature: High: 43ºC | Medium: 38ºC | Low: 32ºC
Warm-up Time: Air temperature at nozzle exceeds 38ºC in approximately 30 seconds
Air Flow Rate: Approximately 55 CFM
Operating Noise Level: Less than 55 db (normal conversation level

Safety Features:

Temperature Regulation: within ±0.5ºC typical
Over-Temperature Controls: Redundant sensors shut down heater, and indicator illuminates if temperature set-points have been exceeded.
Auto Temperature Step-Down: Air temperature automatically steps down from Boost to High after 45 minutes of use.
Auto Reset: Air temperature setting defaults to Ambient until set point is chosen by operator.
Filtration: HEPA filter is 99.97% efficient to 0.03 micron.

Physical Characteristics:

Electrical Characteristics: