Integrated Services : Medical Equipment Rental

Call us today at 888-388-4477

Bear Cub 750 VS Infant Ventilator

Bear Cub 750
Add to Quote Request
Product Id
# 436

The Bear Cub 750 offers three layers of safety for infant lung protection. Providing flow cycling, adjustable pressure limit and volume limit. Bear Cub® 750 Infant Ventilator is designed to accommodate a range of patients from the small neonate to the 30kg pediatric patient. The 750 ... [Full Description]

Description

The Bear Cub 750 offers three layers of safety for infant lung protection. Providing flow cycling, adjustable pressure limit and volume limit.

Bear Cub® 750 Infant Ventilator is designed to accommodate a range of patients from the small neonate to the 30kg pediatric patient. The 750 incorporates Integrated Synchronized Ventilation, Tidal Volume Monitoring and Independent Base & Inspiratory Flows for clinical flexibility in a compact design. Volume Limit™ provides the clinician with an additional guidance tool during pressure ventilation as it enhances volume management and establishes an upper boundary for deliverable tidal volumes during mechanical breaths.

The Bear Cub 750 provides responsive and accurate proximal airway flow triggering and volume monitoring. The improved heated wire anemometer flow sensor provides accuracy in the breath-to-breath measurement of spontaneous and mechanical inspiratory and expiratory tidal volume and percentage of tube leak.

Flow triggering at the proximal airway offers the sensitivity and response time that is required for tiny premature infants with rapid respiratory rates. This results in consistent ventilator-patient synchrony and decreased work of breathing in infants.

The Ventilator Graphics Monitor can be used interchangeably between different Bear Cub 750 Ventilators. This monitor interfaces with the ventilator and uses the flow measurements from the proximal airway flow sensor and pressure measurements from the proximal pressure line to monitor pressure, flow and volume waveforms. Pressure and Flow Volume Loops may also be displayed.

FEATURES:

  • Integrated Synchronized Ventilation
  • Tidal Volume Monitoring
  • Independent Base & Inspiratory Flows
  • Internal Battery Back-Up
  • Exclusive Volume Limit
  • Assist Control
  • Flow Cycled AC
  • SIMV/IMV
  • Flow Cycled SIMV
  • CPAP
  • SIMV with Pressure Support

SPECIFICATIONS:

Controls

  • Mode: AC, Flow cycle AC, SIMV/IMV, Flow Cycled SIMV, SIMV/PSV, PSV, CPAP
  • Ventilator Rate: 1.0 to 150 BPM
  • Inspiratory Time: 0.1 to 3.0 sec.
  • Inspiratory Flow: 1.0 to 30 LPM
  • Base Flow: 1.0 to 30 LPM
  • Volume Limit: 5.0 to 300 ml
  • PEEP: 0 to 30 cmH2O
  • Inspiratory Pressure: 0 to 72 cmH2O
  • Manual Breath: x One
  • Assist Sensitivity: 0.2 to 5.0 LPM; Minimum to Maximum bar
  • Over Pressure Relief: 15 to 75 cmH2O
  • % O2: 21 to 100%
  • Alarm Loudness: Min 60 to Max. 75 dbA
  • Audible Off Volume Limit: LED On/Off

Alarms

  • High Breath Rate: 3.0 to 255 BPM
  • Low PEEP/CPAP: -5.0 to 30 cmH2O
  • Low Inspiratory Pressure (vs): 1.0 to 65 cmH2O
  • Low Inspiratory Pressure (psv): 5 to 41 cmH2O (derived from High Pressure Limit and Low PEEP/CPAP Alarm Settings
  • Patient Circuit: LED On/Off
  • Failed to Cycle: LED On/Off
  • Low Gas Supply: LED On/Off
  • Apnea Alarm: 5, 10, 20, 30 sec
  • Settings Incompatible: LED On/Off
  • Pressure Settings Incompatible: LED On/Off
  • Prolonged Inspiratory Pressure: LED On/Off
  • Flow Sensor: LED On/Off
  • Low Battery: LED On/Off
  • Alarm Silence: 60 sec
  • Visual Reset: Push Button
  • High Pressure Limit: 10 to 75 cmH2O
  • Low Minute Volume: Off to 99 lpm

Monitors

  • PEEP: 0 to 30 cmH2O
  • Breath Rate: 0 to 255 BPM
  • Breath Type (Patient Initiated): LED
  • Minute Volume: 0 to 30.0 LPM
  • Tidal Volume (Exhaled): 0 to 500 ml
  • % Tube Leak: 0 to 100%
  • Inspiratory Time: 0.1 to 3.10 sec Expiratory Time 9 to 99.9 sec
  • I:E Ratio: 9.9:1 to 1:9.9
  • Peak Inspiratory Pressure: 0 to 99 cmH2O
  • Mean Airway Pressure: 0 to 75 cmH2O
  • Air Pressure: 0 to 100 psig; 0 to 99 psig
  • O2 Pressure: 0 to 100 psig; 0 to 99 psig
  • Proximal Airway Pressure: -10 to 100 cmH2O
  • Hour meter: 0 to 99,999 hours
  • Test: Push Button
  • Line Power: Green/Red LED
  • Battery: LED On/Off
  • Inspired Tidal Volume: 0 to 500 ml

Limits to Ventilation (Fixed)

  • Minimum Expiratory Time: 0.15 seconds
  • Maximum Inspiratory Time: 3:10 seconds
  • Maximum settable I:E Ratio: 4:1

 

TOLERANCES:

Monitors

  • Breath Rate: ± 1 BPM or ± 20 msec, whichever is greater
  • Inspiratory Time: ± 0.02 sec
  • Expiratory Time: ± 0.02 sec
  • I:E Ratio: ± 0.1 or ± 20 msec (on the calculation based on the monitored inspiratory and expiratory times), whichever is greater
  • Airway Pressure (Continuous):
    ± 1 cmH2O (-10 to 20 cmH2O)
    ± 2 cmH2O (20 to 65 cmH2O)
    ± 3 cmH2O (65 to 100 cmH2O)
  • Peak Inspiratory Pressure: ± 2 cmH2O or ± 5%, whichever is greater
  • Mean Airway Pressure: ± 2 cmH2O or ± 3%, whichever is greater
  • PEEP: ± 2 cmH2O or ± 5%, whichever is greater
  • Air/O2 Pressure: ± 5 psig
  • Minute Volume Accuracy: Based on the Tidal Volume and Breath Rate Monitors
  • Inspiratory Tidal Volume: ± 1 ml or ± 10%, whichever is greater
  • Expiratory Tidal Volume: ± 1 ml or ± 10%, whichever is greater
  • % Leak: ± 1 ml or ± 2%, whichever is greater
    (when compared to the Inspired and Expired Tidal Volume Monitors)
  • Hour Meter: ± 2% of reading

Alarms/Limits

  • Low PEEP/CPAP: ± 2 cmH2O
  • High Breath Rate: ± 1 BPM
  • Low Minute Volume:
    ± 10 ml/min (0 to 99 ml/min)
    ± 0.1 L/min (0.1 to 9.9 L/min)
  • High Pressure Limit: ± 4 cmH2O
  • Prolonged Inspiratory Pressure: ± 2 cmH2O
  • Volume Limit: ± 2 ml or ±  10% of setting, whichever is greater
  • Apnea: ± 1 sec
  • Maximum (Pop-off) Pressure: ± 4 cmH2O

Controls

  • Ventilator Rate: ± 1 BPM or ± 20 msec (applied to the breath interval), whichever is greater
  • Inspiratory Rate:
    ± 0.020 sec (0.10 to 0.50 sec)
    ± 0.025 sec (0.50 to 3.00 sec)
  • Assist Sensitivity: Not a calibrated scale
  • PEEP/CPAP and Inspiratory: ± 1 cmH2O or ±  5%, whichever is greater (breath to breath)
  • Base/Inspiratory Flow: ± 0.5 LPM or ± 10% of setting, whichever is greater (0 to 60 cmH2O)
  • Oxygen %: ± 3%
  • Degree of Safety in Presence of Flammable Anesthetics: None
  • Mode of Operation: Continuous

Breathing Circuit Parameters

  • Inspiratory Resistance: 0.42 cmH2o/l/min
  • Expiratory Resistance: 0.08 cmH2o/l/min
  • Compliance: 1.34 ml/cmH2o
  • Internal Volume: 1370 ml 

Outputs

  • Digital: RS-232 Bi-Directional
  • Analog: See Manual
  • Proximal Pressure: -10 to 100 cmH2O, 1 cmH2)/25 mV
  • Proximal Inspiratory/Expiratory Flow: -40 (expiratory) to 40 (inspiratory) LPM, 1 LPM/50 mV
  • Machine Delivered Flow: 0 to 30 lpm, 1 LPM/50 mV
  • Breath Phase: 0.5V Logic Signal
  • Remote Nurse Call: 0.5 amps max at 24 vdc
  • Auxiliary Blended Gas Outlet: 7 to 17 psig, 0 to 8 LPM

Inputs

Electrical

  • Voltage:
    100 V - 80 to 110 VAC
    120V - 96 to 132 VAC
    220V - 176 to 242 VAC
    240V - 192 to 264 VAC
  • Current:
    100V - 1.0 A maximum
    120V - 1.0 A maximum
    220V - 0.5 A maximum
    240V - 0.5 A maximum
  • Frequency:
    100V - 50.60 Hz
    120V - 50/60 Hz
    220V - 50/60 Hz
    240V - 50/60 Hz
  • Fuses:
    100/120V - T o.5 A, 5 x 20 mm
    230/240V - T 0.5 A, 5 x 20 mm
    (For 220V operation, set the power entry module seclector switch to 230V setting)

Pneumatic:

  • Oxygen and Air:
    30 to 80 psig, 50 LPM Supply Ratings
    KPa (206 to 551)

 

Physical Dimension and Shipping Information:

  • Ventilator Weight: 12 kg / 13.6 kg
  • Graphics Display Weight: 2.5 kg
  • Pedestal Stand Weight: 4.1 kg<
  • Compressor Weight: 50 kg

  • Ventilator Dimensions: 13.5"W x 10"D x 11"H
  • Graphics Display Dimensions: 13"W x 2.5"D x 9.5"H 
  • Pedestal Stand Dimensions: 24" x 40.5"H
  • Compressor Dimensions: 22"W x 21.5"D x 36"H

  • Shipping Weight Including Ventilator: 17 kg; 18.2 kg
  • Graphics Display: 5 kg
  • Pedestal Stand: 5.1 kg
  • Compressor: 9.1 kg

  • Shipping Dimensions
    Ventilator: 18"W x 18"D x 19"H
    Graphics Display: 16"W x 13"D x 11"H
    Pedestal Stand: 25"W x 5"D x 45"H
    Compressor: 26"W x 22"D x 40"H

Environmental Specifications:

Temperature

  • Storage and Shipping: -40 to 70 C
  • Checkout and Operating: 10 to 40 C

Altitude

  • Checkout, Operating, Transport and Storage 0 to 3,000 meters (14.7 to 10.5 PSIA/760 to 543 mm Hg)

Humidity

  • Storage and Shipping: 0 to 99% Relative Humidity - Non-condensing
  • Checkout and Operating: 0 to 95% Relative Humidity - Non-condensing

back to top


RSS
© 2005-2010 DRE INC all rights reserved.