Caring for low birth weight neonates requires creating the best possible thermal-neutral environment. The Drager Isolette C2000 Infant Incubator helps to promote and foster neonatal care by delivering a heated and humidified environment.
Features
Optional Dual Access Doors – Allow access from either side, expediting care.
Thermal Performance – Patented dual air curtains reduce radiant heat loss from the infant by warming the inner hood surface. A bi-directional airflow feature helps to minimize temperature fluctuations when the access doors are opened.
Large Mattress and Dual Probes – The C2000 incubator allows for simultaneous care of twins in the same unit, allowing more incubators for more patients.
Internal Noise Level less than or equal to 47dBA – Maintains a supportive environment for both patient and caregiver.
Optional In-bed Scale – Weigh the baby in a warm environment with minimal disturbance.
24-hour Data Trends – This unit facilitates record keeping for air and skin temperature, oxygen, humidity, heater power, and weight changes.
Specifications
Air-Shields Incubator with VHA Stand
Width: 38.0" (99 cm)
Depth: 26.3" (67 cm)
Height: 52.5" - 60" (133.4 to 152.4 cm)
Weight: 198 lbs (90 kg)
Air-Shields Incubator with Fixed Height Stand
Width: 46.8" (119 cm)
Depth: 26.3" (67 cm)
Height: 56" (142 cm)
Weight: 175 lbs (79.5 kg)
Hood Specifications
Mattress tray size: 16" x 32" (40.6 81 cm)
Mattress to hood: 16.25" (41.2 cm)
Access panel opening: 11" (28 cm)
Standard hood includes: 4 port doors; 2 iris ports; front access panel; 3 left and 3 right tubing grommets-front
Mattress tilt: ±12° (±1° C)
Micro air intake filter: 99.9% efficiency
Particle size removal: 0.3 micron
Air mode control range: 20 to 39.0°C
Air mode override: >37.0°C
Air flow velocity across mattress: <10 cm/sec
Skin mode control range: 34.0 to 38.0° C
Skin mode override: >37.0° C
Temperature rise time (at 22°C ambient): <35 minutes
CO2 levels: <0.5% when delivered at 750 ml/min at a point 10 cm above the mattress
Operating noise level in hood: 47 dBA (49 dBA with Servo Controlled Oxygen)
Casters (4 casters, 1 steering): 5" (12.7 cm)
RS-232 output
Controller with LCD with brightness control
Selectable color combinations: white on blue background (default) or yellow on black background
Dual-skin temperature monitoring
6 AC (Mains) outlet
Keypad lock
24 Hour trend of: Air temperature, skin temperature (1 and 2), Relative humidity, Oxygen concentration, Heater power
Environmental Requirements
Operating temperature range: 20°C to 30°C ambient
Storage temperature range: -25°C to 60°C ambient
Operating humidity range: 5% RH to 99% RH, non condensing
Storage humidity range: 0% to 99% RH, non condensing
Operating RH sensor temp. range: 20°C to 41°C
Operating O2 sensor temp. range: 20°C to 41°C
O2 sensor calibration pressure: 600 to 900 mm Hg
Alarms
Temperature (limiting ≤): 38°C for air temp. < 37°C; 40.0° C for air temp. > 37° C
Baby set temperature: ±1° C (or ±0.5° C)
Air set temperature: +1.5° C/-2.5° C
High/Low Skin Temperature Alarms
High/low air temperature
High temperature cut-out
Air probe failure
Skin probe failure/disconnect
Low air flow
Low humidity (humidity option)
Low/high oxygen (±3%) (oxygen option)
Oxygen calibration required (oxygen option)
Oxygen cell difference (oxygen option)
Oxygen solenoid failure (oxygen option)
Scale disconnect (scale option)
Too much weight (scale option)
System Alarms
Controller failure
Sensor module failure
sensor module out of position
Motor failure
Power failure
Heater failure
Sensor disconnected
Key stuck
Servo Humidity Option
Water capacity: 1000ml
Refill time: >24 hrs @ 85 RH%;
Range: 30 to 95%
Display accuracy: ±6% RH%
Servo Oxygen Option
Accuracy: 100% cal ±3%
Accuracy: 21% cal ±5%
Range: 21 to 65%
Resolution: 1%
Scale Option
Weight range: 0 to 15.4 lbs (0 to 7 kg)
Weight display resolution: 1 g or 1 oz (OIML = 10 g or 1 oz)
Weight accuracy: 2 g ± 1/2 digit up to 2 kg (OIML = 10 g); 5 g ± 1/2 digit over 2 kg
Weight gain or loss trended over 7 days
Other Options (Attach to Accessory Rail)
IV Pole weight limit: 10.4 lb (4.72 kg)
Monitor shelf weight limit: 25 lb (11.4 kg)
Rear access door: Provided with 2 port doors and 4 additional hood grommets 2 left and 2 right
English
Español
