DRE is now Avante Medical Surgical

Visit our new website by using the "Proceed to new URL" button.

DRE Neolite Infant Radiant Warmer

(800) 462-8195


The Neolite Infant Warmer features two control modes: manual control and skin temperature servo-control

The Neolite Infant Warmer also lets you:

  • Simultaneously monitor the set temperature and the skin temperature
  • Easily adjust the horizontal angle of the radiator and the inclination of the infant bed
  • Folding panels provide convenient access to the infant


  • Touch switch panel for setting temperature and real temperature
  • APGAR timer
  • Heating power rate indicates 0-100%
  • Multi-function self-checking alarms
  • X-ray cassette located under bed
  • RS232 connector
  • Data output
  • Standard configuration includes:
    • Radiation head
    • Temperature controller
    • Skin temperature sensor
    • Bed temperature sensor
    • Infant bed and bed deck
    • I.V. pole
    • Tray and stand



  • Power Supply: AC110V - 240V/50-60HZ
  • Power Input: 700VA
  • Temperature Control Range: 25° C – 37° C
  • Sensor Precision: ≤0.3° C
  • Uniformity of Bed Temperature: ≤2.0° C
  • Adjustment Angle for the Radiation Head: 0°, 30°, 60°
  • Inclination of Infant Bed: ±15°
  • APGAR Timer: Sound indications at 1 min., 5 min., 10 min.


  • Audible and Visible Alarm: Indicates the real temperature and cuts off the power supply of heater when necessary
  • Over-Temp Alarm: Sounds when skin temperature is >39.5° C
  • Deviation Alarm: Indicates when the temperature deviates from the setting temperature by ±1° C
  • Sensor Alarm: When the sensor is disconnected, open circuit, short circuit or put on the outside of bed
  • Power Failure Alarm: Sounds when the unit is turned on but there is no power or if the power cord is disconnected
  • System Alarm: Sounds when there is a system malfunction inside the temperature controller


  • Gross Weight: 110 kg
  • Measurement: 1,270 mm × 810 mm × 1,110 mm