Tecnolog

Web ID: 1436

Condición: Refurbished

Part Number: 70202FX-N - New; 70202FXC - Used

0 Los artículos están en tu carrito. Mirar Carrito ya.

¿Necesita asesoramiento sobre los equipos? ¡Pregunte a Nuestros Expertos!

(502) 244-6333

Descripción

Force FX-C
Tecnología Instant Response™
La tecnología Instant Response™ provee a los cirujanos una mejora en el desempeño de ajustes de energía más bajos, reduciendo al mínimo el riesgo de daño del tejido fino y del estímulo neuromuscular, y disminuyendo la necesidad de incrementar el poder del generador.Un corte más liso a través de todos los tipos del tejido fino.
El generador de la Unidad Force FX™ ajusta automáticamente, respondiendo al cambio de tejido fino, manteniendo el mismo nivel de energía, y reduciendo al mínimo la fricción.La seguridad y la confiabilidad agregadas reduce al mínimo los riesgos de Electro quirúrgicos.
El acoplador capacitivo es reducido por 30-50% al usar la tecnología Instant Response™. Esta reducción es alcanzada limitando el voltaje del RMS y los armónicos de la alta frecuencia. Menos voltaje significa menos estímulo neuromuscular y entrega más exacta de la energía y así reducir daño colateral.

Especificaciones

Output Waveforms

  • Bipolar
    • Precise: 470 kHz sinusoid
    • Standard: 470 kHz sinusoid
    • Macro: 470 kHz sinusoid
  • Monopolar Cut
    • Low: 390 kHz sinusoid. Similar to the Pure Cut mode except the maximum voltage is limited to a lower value.
    • Pure: 390 kHz sinusoid
    • Blend: 390 kHz bursts of sinusoid, recurring at 27 kHz intervals. 50% duty cycle envelope.
  • Monopolar Coag
    • Desiccate: 240 kHz sinusoid repeated at 39 kHz. 8% duty cycle.
    • Fulgurate: 390 kHz damped sinusoid bursts with a repetition frequency of 30 or 57 kHz into 500 ohms.
    • Spray: 390 kHz damped sinusoidal bursts with a randomized repetition centered at 28 kHz. Frequencies include 21 kHzz < f < 35 kHz. Output is further modulated by a random 250 Hz envelope with a variable duty cycle.

Output power changes by less than 15% or 5 watts, whichever is greater, as the line voltage varies from 104-132 volts and 208-264 volts (at rated load).

Low Frequency Leakage (50-60 Hz)

Source current, patient leads, all outputs tied together.

  • Normal polarity, intact chassis ground: < 10 µA
  • Normal polarity, ground open: < 50 µA
  • Reverse polarity, ground open: < 50 µA
  • Sink current, 140V applied, all inputs: < 50 µA

PER = 98

PER (Power Efficiency Rating) is the measure of an electrosurgical generator's ability to accurately deliver the selected power into a wide range of tissue types.

Physical Weight & Dimensions

  • Height: 57 inches
  • Width: 51-1/2 inches
  • Depth: 24-1/8 inches

Input Power Requirements

Operating range is 85 to 132 AC volts. Maximum current is 7 amperes in Cut and 4 amperes in Coag.

High Frequency Leakage

  • Bipolar: Less than 60 mA (rms)
  • Monopolar: Less than 150 mA (rms)

REM™ Contact Quality Monitoring System

  • Measurement Frequency: 80 kHz ± 10 kHz
  • Measurement Current: Less than 10 µA
  • Acceptable Resistance Ranges:
    • REM™ pad – 5-135 ohms
    • Non-REM™ pad – less than 20 ohms
  • Acceptance range is 5-135 ohms after REM PolyHesive II return electrode is applied.
  • Adaptive REM™: REM™ trip is baseline impedance plus 40%. For example, if the baseline impedance is 30 ohms, the upper level trip approximately 42 ohms. If the pad-patient impedance falls below the baseline impedance, a new baseline is established.

Output Characteristics

Bipolar

  • Precise Mode:
    • Maximum P-P Voltage: 450
    • Rated Load (OHMS): 100
    • Maximum Power (Watts): 70
    • Crest Factor* (Typical): 1.5
  • Standard Mode:
    • Maximum P-P Voltage: 320
    • Rated Load (OHMS): 100
    • Maximum Power (Watts): 70
    • Crest Factor* (Typical): 1.5
  • Macro Mode:
    • Maximum P-P Voltage: 750
    • Rated Load (OHMS): 100
    • Maximum Power (Watts): 70
    • Crest Factor* (Typical): 1.5

Monopolar Cut

  • Low Mode:
    • Maximum P-P Voltage: 1350
    • Rated Load (OHMS): 300
    • Maximum Power (Watts): 300
    • Crest Factor* (Typical): 1.5
  • Pure Mode:
    • Maximum P-P Voltage: 2300
    • Rated Load (OHMS): 300
    • Maximum Power (Watts): 300
    • Crest Factor* (Typical): 1.5
  • Blend Mode:
    • Maximum P-P Voltage: 3300
    • Rated Load (OHMS): 300
    • Maximum Power (Watts): 200
    • Crest Factor* (Typical): 2.5

Monopolar Coag

  • Desiccate Mode:
    • Maximum P-P Voltage: 3500
    • Rated Load (OHMS): 500
    • Maximum Power (Watts): 120
    • Crest Factor* (Typical): 5
  • Fulg. High Crest Factor* Mode:
    • Maximum P-P Voltage: 8500
    • Rated Load (OHMS): 500
    • Maximum Power (Watts): 120
    • Crest Factor* (Typical): 7.0
  • Fulg. Low Crest Factor Mode:
    • Maximum P-P Voltage: 6900
    • Rated Load (OHMS): 500
    • Maximum Power (Watts): 120
    • Crest Factor* (Typical): 5.5
  • Spray Mode:
    • Maximum P-P Voltage: 9000
    • Rated Load (OHMS): 500
    • Maximum Power (Watts): 120
    • Crest Factor* (Typical): 8

Monopolar Coag

  • Desiccate Mode:
    • Maximum P-P Voltage: 3500
    • Rated Load (OHMS): 500
    • Maximum Power (Watts): 120
    • Crest Factor* (Typical): 5
  • Fulg. High Crest Factor* Mode:
    • Maximum P-P Voltage: 8500
    • Rated Load (OHMS): 500
    • Maximum Power (Watts): 120
    • Crest Factor* (Typical): 7.0
  • Fulg. Low Crest Factor Mode:
    • Maximum P-P Voltage: 6900
    • Rated Load (OHMS): 500
    • Maximum Power (Watts): 120
    • Crest Factor* (Typical): 5.5
  • Spray Mode:
    • Maximum P-P Voltage: 9000
    • Rated Load (OHMS): 500
    • Maximum Power (Watts): 120
    • Crest Factor* (Typical): 8

CEM™ Mode

  • Monopolar Cut (Low):
    • Maximum P-P Voltage: 1000
    • Rated Load (OHMS): 300
    • Maximum Power (Watts): 100
    • Crest Factor* (Typical): 1.5
  • Monopolar Coag (Dessicate):
    • Maximum P-P Voltage: 3500
    • Rated Load (OHMS): 500
    • Maximum Power (Watts): 70
    • Crest Factor* (Typical): 5

* Crest Factor is an indicator of a waveform's ability to coagulate without cutting.

Suministros y Accesorioss

Web ID ESU Pens & Pencils Part #  
2867 DRE Disposable Monopolar Handswitching Pencil (50/Box) P00507.50
13136 Reusable Monopolar Handswitching Pencil P01147
13141 Disposable Foot Control Pencil w/Blade Electrode P01090
13148 Sterile Holsters for ESU Pencils P05305
13149 Disposable Scratch Pad for ESU Pencils P02050
Web ID ESU Footswitches Part #  
13408 Bipolar Foot Pedal P99002
Web ID Accessorios para Electroquirúrgicas Part #  
13409 Mobile ESU Cart P01594
Web ID Cautery Electrodes Part #  
13119 Standard Blade Electrode, Disposable Sterile - 50/bx P00654
13120 Sharp Dermal Electrode, Disposable Sterile - 50/bx P00993
13121 Blunt Dermal Electrode, Disposable Sterile - 50/bx P01000
13122 Standard Needle Electrode, Disposable Sterile - 25/bx P00652
13125 5 mm Ball Electrode, Disposable Sterile - 5/bx P05220
13128 Supercut Tungsten Needle, Super Fine 3 cm - 5/bx P02220
Web ID Grounding Pads Part #  
13411 Disposable Split Grounding Pads w/ Cord Attached P00084
13152 Disposable Split Grounding Pads w/o Cord P00985
13412 Disposable Solid Grounding Pad w/ Cord Attached P00085
13153 Disposable Solid Grounding Pad w/o Cord P00910
13413 Reusable Grounding Plate - Pediatric P00087
13154 Reusable Grounding Plate Cord P00892
13410 Grounding Plate Cord - Disposable Pads P00894
Web ID ESU Cords & Adapters Part #  
2810 Conmed Reusable Plate Cord-Single Plug P00088
Web ID Cautery Forceps Part #  
13156 Coated 3-1/2” McPherson Straight Micro (.5mm) P01967
13157 Smooth 8" Bayonet Medium (2.0mm) P00891
13158 Smooth 7-1/4" Bayonet Fine (1.0mm) P01071
13159 Bovie Smooth 7” Straight Fine (1.0mm) P00963
13160 Smooth 4-3/4” Straight Medium (2.0mm) P00890
13161 Smooth 4-1/2” Curved Micro (.5mm) P01051
13414 Reusable Bipolar Forcep Cord P02039

Shop By Category