English
EspañolValleylab Force 1B Digital ESU - Refurbished
Valleylab Force 1B Digital ESU - Refurbished
Este producto es muy dificil para encontrar o ya no está disponible de DRE, por favor vea la lista de productos relacionados abajo o pedir su experto de equipos para informacion sobre un producto similar disponible.
0 Los artículos están en tu carrito. Mirar Carrito ya.
¿Necesita asesoramiento sobre los equipos? ¡Pregunte a Nuestros Expertos!
(502) 244-6333
Descripción
Features
- Monopolar and Bipolar Outputs
- Audible and Visual Arms, including REM™ Fault Indicator
- REM™ (Return Electrode Monitoring) (Standard)
- 300 Watts Output - Cut, 120 Watts - Coagulation, 70 watts - Biopolar
- Monopolar Foot Switch Included
- Bipolar Foot Switch (Optional)
- Rolling Carts (Optional)
Especificaciones
Physical Weight & Dimensions
- Dimensions: 8 × 11 × 17 inches (15 × 28 × 3 cm)
- Weight: 15 lbs (6.4 kg)
Output Characteristics
- Cut: 2400 Max (open circuit) P-P Voltage, 300 Rated Load ohms, 200 Nominal Power at rated load watts, 1.8 @ 100 W Crest Factor at rated load typical
- Blend 1: 2800 Max (open circuit) P-P Voltage, 300 Rated Load ohms, 175 Nominal Power at rated load watts, 2.7 @ 100 W Crest Factor at rated load typical
- Blend 2: 3200 Max (open circuit) P-P Voltage, 300 Rated Load ohms, 150 Nominal Power at rated load watts, 3.3 @ 100 W Crest Factor at rated load typical
- Blend 3: 3600 Max (open circuit) P-P Voltage, 300 Rated Load ohms, 125 Nominal Power at rated load watts, 4.6 @ 100 W Crest Factor at rated load typical
- Coag: 5000 Max (open circuit) P-P Voltage, 300 Rated Load ohms, 75 Nominal Power at rated load watts, 8.0 @ 50 W Crest Factor at rated load typical
- Bipolar: 800 Max (open circuit) P-P Voltage, 100 Rated Load ohms, 50 Nominal Power at rated load watts, 1.8 @ 40 W Crest Factor at rated load typical
Output Waveform
- Cut: 500 kHz Sinusoid
- Blend 1: 500 kHz bursts, 50% Duty Cycle, 31 kHz Recurrence
- Blend 2: 500 kHz bursts, 37.5% Duty Cycle, 31 kHz Recurrence
- Blend 3: 500 kHz bursts, 25% Duty Cycle, 31 kHz Recurrence
- Coag: 500 kHz bursts, 31 kHz Recurrence
- Bipolar: 500 kHz bursts, Unmodulated Recurrence
Low Frequency Leakage (50/60 Hz)
- Normal polarity: intact chassis ground: < 10 mA, ground open; < 100 mA.
- Reverse polarity: ground open: < 100 mA. Sink current, 140V applied, all inputs; < 150 mA. Chassis source current, ground open; < 110 mA
High Frequency Risk Parameters
Bipolar and Monopolar RF leakage current: < 150 milliamperes
REM™ Contact Quality Monitor
- Measurement frequency: 140 kHz ± 10 kHz.
- Measurement current: 1.5 mA ± 0.5 mA
Input Power Source
Nominal input line voltage is 120 VAC with a full range of 85-135 VAC. Frequency line varies from 45 to 65 Hz.
- Idle: 0.5 A (Max. Current), 60 W (Max. Power)
- Cut: 5.0 A (Max. Current), 600 W (Max. Power)
- Coag: 30 A (Max. Current), 300 W (Max. Power)
- Bipolar: 1.5 A (Max. Current), 180 W (Max. Power)