Valleylab LigaSure Sistema Sellado de Vaso

Valleylab LigaSure Sistema Sellado de Vaso

Web ID: 1683

Condición: Refurbished

0 Los artículos están en tu carrito. Mirar Carrito ya.

¿Necesita asesoramiento sobre los equipos? ¡Pregunte a Nuestros Expertos!

(502) 244-6333

Descripción

El instrumento de electrocirugía ofrece oclusión permanente del vaso. La revolucionaria tecnología del sistema LigaSure ™ sustituye casi todos los otros instrumentos hemostáticos porque no sólo liga vasos, en realidad fusiona paredes de los vasos para crear un sello permanente.

Características de Funcionamiento

General

  • Configuración de salida: Salida aislada
  • Enfriamiento: Convección natural)
  • Pantalla: Dos (2) digitales pantallas de siete segmentos (1,9 cm [0.75] cada uno)
  • Montaje: Un coche de Valleylab o superficie plana y estable

Parámetros de Funcionamiento

  • Intervalo de temperatura: 10º a 40º C (50° a 104° F)
  • Humedad relativa: 15% a 90%, sin condensación
  • Presión atmosférica: 700 a 1060 milibares
  • Tiempo de Calentamiento: Si transportado o almacenado a temperaturas fuera del intervalo de temperatura de la operación, permita una hora para que el generador alcance la temperatura de ambiente antes de usar.

Dimensiones y Peso

  • Ancho: 38.6 cm (15,2 in)
  • Profundidad: 40.6 cm (16,0 in)
  • Altura: 12.7 cm (5,0 in) sin incluir las patas
  • Peso: 5.9 kg (13 libras) típicos

Audio Volumen: El nivel indicado de audio es para la activación del tono y el tono de alarma a una distancia de un metro. Los tonos de la alarma cumplen con los requisitos de la norma IEC 60601-2-2.. Activación de Tono

  • Volumen (ajustable): 45 dB mínimo
  • Frecuencia (nominal): Modo de Seal - 440 Hz, Macrobipolar Modo - 520 Hz, Modo Bipolar - 660 Hz
  • Duración: Continua, mientras que el generador está activado; cambia a un tono corto cuando el ciclo del sello se ha completado.

Tono de Alarma

  • Volumen (no regulable): 65 dB mínimo
  • Frecuencia: 85 Hz a 780 Hz, 985 Hz nominal

Salida de Onda

  • Macrobipolar / Bipolar: 473 kHz sinusoidal, 100% del ciclo
  • Cierre: 473 kHz sinusoidal, impulsos

Instrumentos de Laparoscópica:

  • LigaSure™ V, LigaSure Atlas™ y Sure™ Lap

Instrumentos Abiertos:

  • LigaSure Atlas™ 20 cm, LigaSure Impact™, Sure Precise™, LigaSure™ Std, LigaSure™ Max, LigaSure™ Axs, LigaSure™ Xtd y LigaSure™ Generator

Especificaciones

Physical Weight & Dimensions

  • Width: 38.6 cm (15.2 in)
  • Depth: 40.6 cm (16.0 in)
  • Height: 12.7 cm (5.0 in) not including feet
  • Weight: 5.9 Kg (13 lbs) typical

General

  • Output configuration: Isolated output
  • Cooling: Natural convection
  • Display: Two (2) digital seven-segment displays: 1.9 cm (0.75 in) each
  • Mounting: A Valleylab cart or stable flat surface

Operating Parameters

  • Ambient temperature range: 10° to 40° C (50° to 104° F)
  • Relative humidity: 15% to 90%, noncondensing
  • Atmospheric pressure: 700 to 1060 millibars
  • Warm-up time: If transported or stored at temperatures outside the operating temperature range, allow one hour for the generator to reach room temperature before using.

Audio Volume

  • The stated audio level is for the activation tone and alarm tone at a distance of one meter. Alarm tones meet the requirements of IEC 60601-2-2

Activation Tone

  • Volume (adjustable): 45 dB minimum
  • Frequency (nominal): Seal Mode - 440 Hz, Macrobipolar Mode - 520 Hz, Bipolar Mode - 660 Hz
  • Duration: Continuous while the generator is activated; changes to one short tone when seal cycle is complete.

Alarm Tone

  • Volume (not adjustable): 65 dB minimum
  • Frequency: 985 Hz to 780 Hz; 985 Hz nominal

Output Waveform

  • Macrobipolar/Bipolar: 473 KHz sinusoid, 100% duty cycle
  • Seal: 473 kHz sinusoid, pulsed

 

Optional Instruments

The LigaSure Vessel Sealing System is compatible with a variety of specialty instruments, these are optional. Please inquire with your DRE representative about availability:

Optional Laparoscopic Instruments

  • LigaSure™ V — 5 mm shaft, single use instrument that dissects, grasps, seals, and divides.
  • LigaSure Atlas™ — Single use laparoscopic sealer/divider instrument that seals and divides vessels up to and including 7 mm in diameter and tissue bundles.
  • LigaSure™ Lap — Single use laparoscopic instrument for laparoscopic procedures.

Optional Open Instruments

  • LigaSure Atlas™ 20 cm — Single use sealer/divider instrument that offers reliability for dissection, grasping, sealing, and cutting in open procedures.
  • LigaSure Impact™ — Works exclusively with the ForceTriad™ energy platform, utilizing the TissueFect™ sensing technology that precisely manages energy delivery for consistent, controlled tissue effects with faster fusion times than the original LigaSure™ generator
  • LigaSure Precise™ — Single use instrument specifically designed to provide permanent vessel occlusion to structures that require fine grasping.
  • LigaSure™ Std — Reposable instrument for general surgery open procedures.
  • LigaSure™ Max — Reposable gynecology instrument for open procedures. The instrument's textured surface provides improved grasping capability for thick tissues.
  • LigaSure™ Axs — Reposable instrument that has extra length and an angled jaw to allow better access in deep cavaties.
  • LigaSure™ Xtd — Reposable instrument for deep cavity procedures. The longer instrument allows the surgeon to comfortably hold the device outside the surgical site.
  • LigaSure™ Generator — The LigaSure™ generator is a computer controlled electrosurgical unit with two distinct outputs. The LigaSure™ vessel sealing receptacle diagnoses the tissue within the jaws of the instrument and delivers the optimal amount of energy necessary to fuse the vessel wall and create a permanent seal. The bipolar receptacle provides both bipolar and macrobipolar outputs.

Shop By Category