DRE is now Avante Health Solutions

Visit our new website by using the "Proceed to new URL" button.

Valleylab Force 1C - Refurbished

(800) 462-8195

Valleylab Force 1C - Refurbished

Web ID: 1682

Condition: Retired

This product is either very difficult to find or no longer available through DRE, please see the list of related items to the right or ask your equipment expert for advice on a similar available product.

0 items are in your cart. View cart now.

Need Advice? Ask Our Experts!

(800) 462-8195

Description

Features

The Force 1C generator features a compact design suitable for the requirements for outpatient and office-based surgery, and the performance requirements for a full range of in-patient general surgery applications.

Digital Electrosurgical Unit suitable for all uses:

  • Outpatient procedures to full range surgical applications.
  • Monopolar and Bipolar outputs.
  • Audible and visual alarms.

Specifications

Physical Weight & Dimensions

  • Dimensions: 6 × 11 × 17 inches (15 × 28 × 43 cm)
  • 5 lbs (6.8 kg)

Output Waveform

  • Cut: 516 kHz sinusoid;
  • Blend 1: 516 kHz of sinusoid at 70% duty cycle recurring at 31 kHz;
  • Blend 2: 516 kHz bursts of sinusoid at 45% duty cycle recurring at 31 kHz;
  • Blend 3: 516 kHz bursts of sinusoid at 20% duty cycle recurring at 31 kHz;
  • Coag: 516 kHz damped sinusoidal bursts with a repetition frequency of 31 kHz;
  • Micropolar: 516 kHz sinusoid, unmodulated.

Output Characteristic

  • Cut: 2400 Max. (open circuit) P-P voltage; 300 Rated Load ohms; 200 Nominal Power at rated load watts; 1.8 @ 100 W Crest Factor at rated load typical
  • Blend 1: 2800 Max. (open circuit) P-P voltage; 300 Rated Load ohms; 175 Nominal Power at rated load watts; 2.7 @ 100 W Crest Factor at rated load typical
  • Blend 2: 3200 Max. (open circuit) P-P voltage; 300 Rated Load ohms; 150 Nominal Power at rated load watts; 3.3 @ 100 W Crest Factor at rated load typical
  • Blend 3: 3600 Max. (open circuit) P-P voltage; 300 Rated Load ohms; 125 Nominal Power at rated load watts; 4.6 @ 100 W Crest Factor at rated load typical
  • Coag: 5200 Max. (open circuit) P-P voltage; 300 Rated Load ohms; 75 Nominal Power at rated load watts; 8.0 @ 50 W Crest Factor at rated load typical
  • Micropolar: 900 Max. (open circuit) P-P voltage; 100 Rated Load ohms; 50 Nominal Power at rated load watts; 1.8 @ 40 W Crest Factor at rated load typical

Input Power Source

(Max. operating range: 85-135 or 170-270 VAC; Nominal operating range: 110-120 or 220-240 VAC)

  • Idle: 0.5 A Max. Current; 60 W Max. Power
  • Cut: 5.0 A Max. Current; 600 W Max. Power
  • Coag: 3.0 A Max. Current; 400 W Max. Power
  • Micropolar: 2.0 A Max. Current; 180 W Max. Power

Line Regulation

Between 85-135 volts or 170-270 volts input, output power into nominal load will vary no more than 20% or 5 watt, whichever is greater.

REM Contact Quality Mon.

Measurement frequency: 140 kHz ± 20 kHz. Measurement current: 3.0mA, maximum.

Low Frequency Leakage

Source current nominal polarity, intact chassis ground: <10 µA, ground open: <50 µA. Source current reverse polarity, ground open: <50 µA. sink current, 135 VAC applied, all inputs: <20 µ A. Chassis source current, ground open: <100 µA

Low Frequency Leakage

Micropolar RF leakage current: <150 mA. Monopolar RF leakage current: <150 mA